1. Power on your player as normal.
2. Press and hold both the Play and Forward buttons on the player.
3. After a short while the words "No Disc" should appear from the onscreen display Release the Play and Forward buttons as soon as you see the words no disk.
4. First press the "Subtitle", then press the "Repeat" button on your remote control.
5. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate:

- Region 1 use [ 2, 9, 3, 3, 4 ]
- Region 2 use [ 3, 8, 7, 6, 7 ]
- Region 3 use [ 5, 6, 7, 3, 2 ]
- Region 4 use [ 7, 6, 8, 8, 4 ]
- Region 5 use [ 5, 3, 8, 1, 4 ]
- Region 6 use [ 2, 4, 4, 6, 2 ]

6. A code should be displayed at the upper left of the screen showing the current Region setting of your unit.
7. Press the "9" button on your remote control for Region free, or "1" for Region 1. Press "2" for Region 2, and so on.
8. Press the Open button on your player, put a DVD movie. Don't press CLOSE!!!
9. Press the Standby button on your remote control.
10. Press Standby again, and wait untill u see the Samsung Digitall logo, press the PLAY button, and here you go, your movie should start now.

1. Turn the player on (without a disc inserted)
2. Press and hold PLAY and FW (or STOP)
3. "No Disc" is displayed
4. Release the keys
5. Press SUBTITLE, REPEAT (or just SUBTITLE or just REPEAT or MENU)
6. Enter the corresponding combination for your current RC (see top of the page)
7. Current RC should be displayed
8. Press the button for the desired RC (9=codefree)
9. Open the disc tray
10. Turn the player off